Getting ready to paint the cab on my 70 D100.
The original A pillar decal is there and in good shape.
Would you guys suggest masking off and painting around the decal,which might lead to a paint ridge around the decal, or can I get a new decal made so I can remove the original and replace it after painting?
Chrysler decal
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
Re: Chrysler decal
Are you talking about the Chrysler emblem on the right side only Fender? I've wondered why they only put this on the right side.
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Chrysler decal
No, he's asking about a decal.
- Jims68
- Sweptline.ORG Pioneer
- Posts: 3126
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Edgewater Park
- State: NJ
- Location: Southern New Jersey
- Contact:
Re: Chrysler decal
Picture of it??? I know that there are REPRO stickers for the cars... and some were/are interchangeable.
Re: Chrysler decal
To answer the questions about the single Pentstar fender badge, it was placed low on the passenger side so that when the car was parked it would be seen by people walking.
Right hand drive vehicles (ie Australia) had the badge on the left fender.
Right hand drive vehicles (ie Australia) had the badge on the left fender.
1964 D100 - Town Wagon 318 NP435
1964 D100 - Town Panel /6 A745
1964 D100 - Town Panel /6 A745
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
Re: Chrysler decal
The decal I’m talking about is inside the drivers door jam , at the front of the door; looks like a manufacture number decal and I’m guessing I can’t get another one, so I’m thinking I’ll have to mask over it when I paint as I doubt I can get a reproduction decal with the same number on it.
- Jims68
- Sweptline.ORG Pioneer
- Posts: 3126
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Edgewater Park
- State: NJ
- Location: Southern New Jersey
- Contact:
Re: Chrysler decal
I don't think my '68 D-100 had one... that is why I was curious to know what decal you were talking about.fireguyfire wrote: ↑Wed Aug 07, 2019 9:15 amThe decal I’m talking about is inside the drivers door jam , at the front of the door; looks like a manufacture number decal and I’m guessing I can’t get another one, so I’m thinking I’ll have to mask over it when I paint as I doubt I can get a reproduction decal with the same number on it.
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
Re: Chrysler decal
Mines a 1970; I’ll post a photo up when I get home in a couple of days.
- soopernaut
- Sweptline.ORG Pioneer
- Posts: 8931
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Des Moines,IA