Window Channela

Body, Trim, Interior, Dealer options, Paint e tc..
Post Reply
Papac3
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 84
Joined: Mon Sep 19, 2011 7:59 pm
City: Kennard
State: NE

Window Channela

Post by Papac3 »

Haven't been on here for a while due to moving and health. Every thing squared away now. Looking for new window channels for the door glass. Thought I had a listing of where to get them but can not find it. The old ones are rust off at the bottom.
Any help would be greatly appreciated. I'll post some pictures when I get her back from the body man.

User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1335
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA
Contact:

Re: Window Channela

Post by powerwagon54 »

I have the window tracks. pm sent

User avatar
PowerPlus
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 7
Joined: Tue Jan 10, 2017 12:49 pm
City: Fort Wayne
State: IN

Re: Window Channela

Post by PowerPlus »

I just rebuilt mine and used CR Laurence part # CP651139 . It's a 48" piece so 1 stick is enough for both doors. Hope this helps some of you out there. They are maybe 1/16" shorter but they worked perfectly! I marked the roller tracks using a t square and stacking the new channel on top of the old one so I knew where to weld them back on the new channel.

Post Reply