Finally found some wiper arms .. now to find wipers?

Body, Trim, Interior, Dealer options, Paint e tc..
Post Reply
GiS
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 8
Joined: Mon Dec 29, 2014 1:04 pm
City: Alberta
State: Foreign

Finally found some wiper arms .. now to find wipers?

Post by GiS »

Hey guys,

Finally found a nice clean set of wiper arms for my 66 D100 .. NOW, does anyone have a part# handy for a set of compatible wipers?

I am getting SO close to getting this on the road I can taste it!

Thanks a ton,

User avatar
MrMopar
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 373
Joined: Thu Jun 09, 2011 11:41 am
City: Lompoc
State: CA
Location: Lompoc, CA
Contact:

Re: Finally found some wiper arms .. now to find wipers?

Post by MrMopar »

I recently went through this on another vehicle and here is what I came up with.

If I recall these trucks use a 13" blade

Correct metal frame style
Trico 43-130
CarQuest 453-130

Functioning substitutes
Trico 44-130
CarQuest 454-130

I think these are Anco (untested)
U13R
19-13

I did check 16" on a different vehicle and just posted what the 13" numbers would be but have not looked for them or tested them.
This should be good start to see if these will work.


Alan
Alan Erland
1967 Plymouth Barracuda
1969 Dodge Polara CHP
1969 Dodge Polara
1970 Dodge Camper Special
www.MrMopar.com

User avatar
WD
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1741
Joined: Wed Dec 31, 1969 6:00 pm
City: Rosemark
State: TN
Location: Lancaster Plantation

Re: Finally found some wiper arms .. now to find wipers?

Post by WD »

I run 72 F250 arms and wiper heads on my 69 D100. Work fine and a lot easier to find than any pre-72 Dodge stuff.
If I didn't build it, it ain't mine.

1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...

User avatar
dodgeboykim
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 3004
Joined: Wed Dec 31, 1969 6:00 pm
City: Chilliwack. B.C. Canada
State: Foreign
Location: chilliwack.

Re: Finally found some wiper arms .. now to find wipers?

Post by dodgeboykim »

WD wrote:I run 72 F250 arms and wiper heads on my 69 D100. Work fine and a lot easier to find than any pre-72 Dodge stuff.

Did you use adapters to fit arms or do they have nut device to hold them on. :thinking :thinking :thinking
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.

User avatar
WD
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1741
Joined: Wed Dec 31, 1969 6:00 pm
City: Rosemark
State: TN
Location: Lancaster Plantation

Re: Finally found some wiper arms .. now to find wipers?

Post by WD »

dodgeboykim wrote:
WD wrote:I run 72 F250 arms and wiper heads on my 69 D100. Work fine and a lot easier to find than any pre-72 Dodge stuff.

Did you use adapters to fit arms or do they have nut device to hold them on. :thinking :thinking :thinking
Pop right onto the splines like they were made for each other. You can use the arms off a real Ford full sized, that means pre-87.
If I didn't build it, it ain't mine.

1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...

User avatar
chief915
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 25
Joined: Sat Jul 11, 2015 5:33 pm
City: Cecilia
State: KY
Location: Cecilia, KY

Re: Finally found some wiper arms .. now to find wipers?

Post by chief915 »

My local Napa had regular black wiper blades in stock for my 1970..... They could also order the "classic" style that had the shiny metal frame.

I don't have the part numbers handy, but they looked it up without any trouble.
1970 Dodge Dude
225 / 3 speed manual

sledgehammer
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 309
Joined: Sun Mar 15, 2009 6:31 pm
City: puyallup,wa

Re: Finally found some wiper arms .. now to find wipers?

Post by sledgehammer »

I bought some Anco U-15R for my '68 at a local parts store. Had to cut them down but was the only size they had in stock. They will work.

User avatar
gyman98
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 432
Joined: Tue Jan 11, 2011 4:25 pm
City: Saskatchewan
State: Foreign

Re: Finally found some wiper arms .. now to find wipers?

Post by gyman98 »

I'm running wiper arms and blades off about a 90 Camry on mine

User avatar
hmaynord
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 237
Joined: Sat Aug 12, 2017 11:49 pm
City: fairhope
State: AL
Location: lower Alabama

Re: Finally found some wiper arms .. now to find wipers?

Post by hmaynord »

this thread is not that old, but any other suggestions for both the arms and shiny blades?
harris
late 65 (titled as 66) D100 SWB 225-1, 3 speed, 3.91
driving it since 12/03/71

Post Reply