Hey guys,
Finally found a nice clean set of wiper arms for my 66 D100 .. NOW, does anyone have a part# handy for a set of compatible wipers?
I am getting SO close to getting this on the road I can taste it!
Thanks a ton,
Finally found some wiper arms .. now to find wipers?
- MrMopar
- Sweptline.ORG Member
- Posts: 373
- Joined: Thu Jun 09, 2011 11:41 am
- City: Lompoc
- State: CA
- Location: Lompoc, CA
- Contact:
Re: Finally found some wiper arms .. now to find wipers?
I recently went through this on another vehicle and here is what I came up with.
If I recall these trucks use a 13" blade
Correct metal frame style
Trico 43-130
CarQuest 453-130
Functioning substitutes
Trico 44-130
CarQuest 454-130
I think these are Anco (untested)
U13R
19-13
I did check 16" on a different vehicle and just posted what the 13" numbers would be but have not looked for them or tested them.
This should be good start to see if these will work.
Alan
If I recall these trucks use a 13" blade
Correct metal frame style
Trico 43-130
CarQuest 453-130
Functioning substitutes
Trico 44-130
CarQuest 454-130
I think these are Anco (untested)
U13R
19-13
I did check 16" on a different vehicle and just posted what the 13" numbers would be but have not looked for them or tested them.
This should be good start to see if these will work.
Alan
Alan Erland
1967 Plymouth Barracuda
1969 Dodge Polara CHP
1969 Dodge Polara
1970 Dodge Camper Special
www.MrMopar.com
1967 Plymouth Barracuda
1969 Dodge Polara CHP
1969 Dodge Polara
1970 Dodge Camper Special
www.MrMopar.com
- WD
- Sweptline.ORG Pioneer
- Posts: 1741
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rosemark
- State: TN
- Location: Lancaster Plantation
Re: Finally found some wiper arms .. now to find wipers?
I run 72 F250 arms and wiper heads on my 69 D100. Work fine and a lot easier to find than any pre-72 Dodge stuff.
If I didn't build it, it ain't mine.
1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...
1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3013
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Finally found some wiper arms .. now to find wipers?
WD wrote:I run 72 F250 arms and wiper heads on my 69 D100. Work fine and a lot easier to find than any pre-72 Dodge stuff.
Did you use adapters to fit arms or do they have nut device to hold them on.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
- WD
- Sweptline.ORG Pioneer
- Posts: 1741
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rosemark
- State: TN
- Location: Lancaster Plantation
Re: Finally found some wiper arms .. now to find wipers?
Pop right onto the splines like they were made for each other. You can use the arms off a real Ford full sized, that means pre-87.dodgeboykim wrote:WD wrote:I run 72 F250 arms and wiper heads on my 69 D100. Work fine and a lot easier to find than any pre-72 Dodge stuff.
Did you use adapters to fit arms or do they have nut device to hold them on.
If I didn't build it, it ain't mine.
1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...
1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...
- chief915
- Sweptline.ORG Member
- Posts: 25
- Joined: Sat Jul 11, 2015 5:33 pm
- City: Cecilia
- State: KY
- Location: Cecilia, KY
Re: Finally found some wiper arms .. now to find wipers?
My local Napa had regular black wiper blades in stock for my 1970..... They could also order the "classic" style that had the shiny metal frame.
I don't have the part numbers handy, but they looked it up without any trouble.
I don't have the part numbers handy, but they looked it up without any trouble.
1970 Dodge Dude
225 / 3 speed manual
225 / 3 speed manual
-
- Sweptline.ORG Member
- Posts: 310
- Joined: Sun Mar 15, 2009 6:31 pm
- City: puyallup,wa
Re: Finally found some wiper arms .. now to find wipers?
I bought some Anco U-15R for my '68 at a local parts store. Had to cut them down but was the only size they had in stock. They will work.
- gyman98
- Sweptline.ORG Member
- Posts: 432
- Joined: Tue Jan 11, 2011 4:25 pm
- City: Saskatchewan
- State: Foreign
Re: Finally found some wiper arms .. now to find wipers?
I'm running wiper arms and blades off about a 90 Camry on mine
- hmaynord
- Sweptline.ORG Member
- Posts: 237
- Joined: Sat Aug 12, 2017 11:49 pm
- City: fairhope
- State: AL
- Location: lower Alabama
Re: Finally found some wiper arms .. now to find wipers?
this thread is not that old, but any other suggestions for both the arms and shiny blades?
harris
late 65 (titled as 66) D100 SWB 225-1, 3 speed, 3.91
driving it since 12/03/71
late 65 (titled as 66) D100 SWB 225-1, 3 speed, 3.91
driving it since 12/03/71