Page 1 of 1
3 hole mirror post backing
Posted: Mon May 04, 2015 7:32 am
by Jim100
Will a door that does not appear to have ever had the three hole mirror post still have the backing nuts for those three big philips screws?
Thanks jim
Re: 3 hole mirror post backing
Posted: Mon May 04, 2015 7:41 am
by Hobcobble
Jim100 wrote:Will a door that does not appear to have ever had the three hole mirror post still have the backing nuts for those three big philips screws?
Thanks jim
There is a possibility. Can you remove the door panel and run your
hand up into that area? Just a thought.
John
Re: 3 hole mirror post backing
Posted: Mon May 04, 2015 8:17 am
by Txas2step
If it is the passenger side, it will have the holes through inner skin( you can see them with the door panel off. Not sure about the drivers side.I have never seen one w/o the holes.
Re: 3 hole mirror post backing
Posted: Mon May 04, 2015 9:41 am
by Jim100
passenger side. I will remove inner door panel to check but was hoping to not have too as I have a stripped set screw on both the inner door handle and window crank!
Thanks jim
Re: 3 hole mirror post backing
Posted: Mon May 04, 2015 11:58 am
by Jim100
As was suggested the three holes existed through the inner skin on my passenger side door. No nuts in there but you cant have everything.
Thanks all
jim
Re: 3 hole mirror post backing
Posted: Wed Sep 02, 2015 5:57 am
by PunisherD100
Anyone know the thread size of those three screws
Re: 3 hole mirror post backing
Posted: Wed Sep 02, 2015 11:03 am
by dodgeboykim
Believe they are 5/16 NC.