Sun Visor confusion which one?
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Sun Visor confusion which one?
This is probably a newbie question but, hey gotta learn sometime. It seems my 64 D100 Utiline has one sun visor LH side. The current visor doesn't have any protrusion but, the cab has a factory looking hole behind visor. The left one came with the truck and I bought the other two. Are any of these original style and what were they for? Craig
- soopernaut
- Sweptline.ORG Pioneer
- Posts: 8931
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Des Moines,IA
Re: Sun Visor confusion which one?
The middle one looks like a Sweptline one to me. The others I don't recognize.
- WD
- Sweptline.ORG Pioneer
- Posts: 1741
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rosemark
- State: TN
- Location: Lancaster Plantation
Re: Sun Visor confusion which one?
Middle one should work. Send me the black base one, it looks like Pilot House or Power Giant era, so 48-60... and I have a 49 1/2 ton. The other offset mount may be correct for 1st generation (4 headlight), I KNOW the middle one is like my 69 takes.
Re: Sun Visor confusion which one?
The one on the left (black one) is correct for your truck. Starting in 1968 would be the middle style. I don't know about the one on the right.
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1768
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Sun Visor confusion which one?
What you cite above is what I have on the pivot end of my 1968 W200. Yet on the mirror end I have these clips which look different than what I have found in searches here.
The rubber pin on the ends of mine are toast. The clips are way too brittle to keep (one is cracked). Got any ideas how to replace these?
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
-
- Sweptline.ORG Pioneer
- Posts: 4037
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: Sun Visor confusion which one?
FWIW the middle one looks same as my 75.
Bucky
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
-
- Sweptline.ORG Member
- Posts: 5
- Joined: Fri Jan 24, 2020 10:55 am
- City: Wichita Falls
- State: TX
Re: Sun Visor confusion which one?
Would it be possible for a 1967 dodge truck to have one sunviser driver side it has three screw holes and one for the rod but on the passenger side there’s no holes at all for one on passenger side
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Sun Visor confusion which one?
Yup, not uncommon.
- Red383
- Sweptline.ORG Member
- Posts: 344
- Joined: Tue Dec 18, 2012 7:45 am
- City: Fort Loramie
- State: OH
Re: Sun Visor confusion which one?
My Early 1965 has the kind on the left. The drivers side had a hold behind the base like something should protrude through it, but the passenger side just has the three mounting screw holes.
1965 Dodge D200, 318 4-speed converted to 4x4 with NV4500 trans