Page 1 of 1

61-66 panel truck/ town wagon . need floor help

Posted: Tue May 28, 2013 4:24 pm
by exline
I am trying to make the floor for a 63 town wagon and have a few patterns from one but it was to rusted up to get good ones. Can anyone post some pictures of the front floor pan area so i can get an idea of what i am trying to make? Especially the area where the cab mount bolt is . I have the measurement for the location of tthe hole but the floor was gone so bad that i dont know what it looks like there.
I have the rotted left overs of the cab mount to try and copy but if anyone had a good picture of one that would be great too.
Thanks for any help, Kenny

Re: 61-66 panel truck/ town wagon . need floor help

Posted: Tue May 28, 2013 6:52 pm
by Hobcobble
Kenny,
You might also want to post over on:
http://www.powerwagonadvertiser.com :idea
John :Thumbsup

Re: 61-66 panel truck/ town wagon . need floor help

Posted: Thu Jun 15, 2017 11:03 pm
by PwrWgnWalt
Hi Kenny,
Did you ever have any luck getting the Town Panel/Town Wagon floor pans figured out?

I have one now if you need any measurements, pictures, etc.

Thanks!