"Beefy" F/Bumper W/Winch

[Rodger]

Hola All

Do any of you have one of those "beefy" Front Bumpers with an Power Winch and Etc on your Dodge Truck's ? If you do, by chance do you have an photo or two with this combo ???

Rodger & Gabby
COS

[Hobcobble]

Hola All

Do any of you have one of those "beefy" Front Bumpers with an Power Winch and Etc on your Dodge Truck's ? If you do, by chance do you have an photo or two with this combo ???

Rodger & Gabby
COS

Where's the Beef?
Do you mean beefy after-market bumper w/electric winch or stock HD front bumper
with foot holes and FTD7 PTO driven Braden LU-2 winch?......
Enlighten us as to WINCH one....
John

[digdoug]

I do.

[Hobcobble]

I do.

Dang Doug!.... where have you been hiding that red beauty!
Are those 19.5" wheels? That truck is awesome.
Factory hubcaps too!!
John

[digdoug]

Thanks John. I picked this truck up about 6 years ago. It was orphaned after a devorce.It had been used for many years on Katca Mountain in Bonners Ferry as a plow truck. It was Bought new By Dr.Edwards,The same doc that delivered my little sister. It was beat up pretty good when I got it.The cab is the only original sheet metal.Until about a year ago ,when I started painting it,it was hiding in my garage. Its kind of a 25footer,as I didn't do any putty work. The bumper and winch are transplanted from a 64 I picked up last year. The 19.5 wheels came off a 64 P200 .

[Hobcobble]

Thanks John. I picked this truck up about 6 years ago. It was orphaned after a devorce.It had been used for many years on Katca Mountain in Bonners Ferry as a plow truck. It was Bought new By Dr.Edwards,The same doc that delivered my little sister. It was beat up pretty good when I got it.The cab is the only original sheet metal.Until about a year ago ,when I started painting it,it was hiding in my garage. Its kind of a 25footer,as I didn't do any putty work. The bumper and winch are transplanted from a 64 I picked up last year. The 19.5 wheels came off a 64 P200 .

[Sigh] Ahhh...... to have a 25 footer..... That's the stuff dreams are made of.
Double that distance and you have any one of mine.
John

[mowingman]

Here is a photo of my 69, with homemade front bumper and 12,000# electric winch
Jeff

[Rodger]

Hola Gents
The bumper that looked at is the same "cut" as this one except in diam plate.

http://www.4wheeloffroad.com/featuredve ... to_05.html

Rodger & Gabby
COS

[digdoug]

Roger,
Im pretty sure you are talking about a Warn bumper. I have one on my yellow truck too.
Doug

[digdoug]

I just thought I would add,they are beefy! One winter I uprooted 3 pine trees about 4'' in diameter in an emergency stop . There was no dammage to my truck or bumper.

[powerwagoncrazy]

Same old pic... 10" channel iron holding up Tulsa 8000 lb PTO Winch...

[Hobcobble]

Here's a couple I'll add

John