68 W200 Crew

[Brudog]

Been a while since I posted. Truck had been at the shop for a bit getting an engine swap among other things.

Here are some pics:

The attachment IMG_20181116_163244299_HDR.jpg is no longer available

The attachment IMG_20181117_104444287_HDR.jpg is no longer available

Still have quite a bit to do to it, as money allows. Next up will most likely be changing some of the rubber / weather-stripping, as I found quite a few leak spots when checking it with the garden hose. Paint and body work after that...

Jim

[Brudog]

For some reason, not all 3 pics are posting. Will try one at a time.

[Brudog]

[PwrWgnDrvr]

Nice work

fyi, that is not a 68 hood.

[Brudog]

fyi, that is not a 68 hood.

Yep, 61-67. That is what came with it when I got it from Glenn. I have a 68 hood that I am prepping in my intro to collision repair class. Will change them out when I get it painted.

[Hobcobble]

Very nice! I hope Glenn gets a look at it.

John

[Kaegi]

very nice. what year is the hemi?

[slick]

Sweet! Definitely need some info on the Hemi swap about wiring. Did you build a harness or use Hotwire or another company? Truck looks great.

[gww]

pretty sweet.

[Brudog]

Very nice! I hope Glenn gets a look at it.

John

Thanks. I saw this and sent the pics to his email address

Sweet! Definitely need some info on the Hemi swap about wiring. Did you build a harness or use Hotwire or another company? Truck looks great.

Thanks. I am not skilled enuff to do this myself, so had a local shop do it. They went through a company for the harness. Don't know the name right off hand, but I will see if I can find out for ya.

very nice. what year is the hemi?

2014

[pismopowerwagon]

Nice Truck

[Kaegi]

I think the 2014 truck hemi has the mds (the car hemis always did). should get good mileage.

[Brudog]

Been some time since I posted. Here is what it currently looks like after paint.

[PowerMan]

Nice progress. Looking to do the 5.7 Hemi swap. Do you know who made the harness? Are you using the stock computer or maybe EZ EFI?

[Brudog]

Nice progress. Looking to do the 5.7 Hemi swap. Do you know who made the harness? Are you using the stock computer or maybe EZ EFI?

Verified with the shop that did the install that Hotwire was the source of the harness, etc.

[Red383]

Great looking truck. I guess the intro to collision repair class paid off!