need input please

Post a picture of your ride... Or the nice fish you caught last weekend!!
Post Reply
bobmac25
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 76
Joined: Sun Jan 08, 2012 7:15 pm
City: san antonio
State: TX

need input please

Post by bobmac25 »

dent.jpg
front.jpg
dodge engine.jpg
dodge int.jpg
dodge drivers.jpg
This is my 69 d100.I have done a lot to it, I have rewired with a kit from Ron Francis.New wheels and tires less that 10 miles on them. Added new intake and 4 b. carb. new battery,scarebird front brakes. rebuilt rear drums new everything down to the springs. Ran all ne brake lines with prop. valve. New alt.,water pump. New gauges. Also still have most stuff I replaced. I am thinking about selling. I just have no Idea on how to value the truck. All I know is how much I have in it..Any input would be appreciated.

User avatar
my5thmopar
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1002
Joined: Thu Aug 08, 2013 8:51 pm
City: Columbia
State: TN

Re: need input please

Post by my5thmopar »

Nice truck and I have no idea but, one of the guys will chime in. BTW...Your carb is on the non-ported side and that provides full vaccum. You probably know that and have some reason for doing so. Like the silver and welcome.

bobmac25
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 76
Joined: Sun Jan 08, 2012 7:15 pm
City: san antonio
State: TX

Re: need input please

Post by bobmac25 »

Thanks for the heads up about the carb. I did not realize it was backwards. After trying to tune the carb. Guess son put the hose back on. Never even checked it.

User avatar
my5thmopar
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1002
Joined: Thu Aug 08, 2013 8:51 pm
City: Columbia
State: TN

Re: need input please

Post by my5thmopar »

bobmac25 wrote:Thanks for the heads up about the carb. I did not realize it was backwards. After trying to tune the carb. Guess son put the hose back on. Never even checked it.
That will make it hard to tune on a Edelbrock. Your timing is probably wrong. Put it on the vacuum on left, adjust timing and idle. Readjust mix and check it all again. Probably will help with detonation and/or performance. Craig

User avatar
Jake66
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 240
Joined: Mon Apr 21, 2014 1:23 pm
City: Phoenix
State: AZ

Re: need input please

Post by Jake66 »

its a nice truck, get it tuned and running like a clock and you could probably ask $4000 or $5000 for it. $6000 if you got carpet and touched up the bed little things go along ways.

:thinking but she looks very solid and well taken care of. what motor do you have in it?
1966 Dodge D100 Custom SC SWB
Bermuda Turquoise
And
White

bobmac25
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 76
Joined: Sun Jan 08, 2012 7:15 pm
City: san antonio
State: TX

Re: need input please

Post by bobmac25 »

318 with new 4 carb. Motor was rebuilt 6 months before I bought it. Was not driven much. Told has less than 500 miles on motor since rebuild.

User avatar
Jake66
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 240
Joined: Mon Apr 21, 2014 1:23 pm
City: Phoenix
State: AZ

Re: need input please

Post by Jake66 »

that sounds like a pretty solid rig, barely even broken in. any history on the transmission? stock rear end?
1966 Dodge D100 Custom SC SWB
Bermuda Turquoise
And
White

User avatar
Hobcobble
Forum Moderator
Forum Moderator
Posts: 14573
Joined: Wed Dec 31, 1969 6:00 pm
Location: Lockport, NY

Re: need input please

Post by Hobcobble »


bobmac25
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 76
Joined: Sun Jan 08, 2012 7:15 pm
City: san antonio
State: TX

Re: need input please

Post by bobmac25 »

no history on trans. I have not had a problem with it while I have had it. I'm pretty sure the rear is stock. Changed the rear seals and everything went according to the instructions for a stock rear.

User avatar
Jake66
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 240
Joined: Mon Apr 21, 2014 1:23 pm
City: Phoenix
State: AZ

Re: need input please

Post by Jake66 »

it sounds pretty solid. if your still looking to sell it, id start at $4000 maybe $5000
1966 Dodge D100 Custom SC SWB
Bermuda Turquoise
And
White

bobmac25
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 76
Joined: Sun Jan 08, 2012 7:15 pm
City: san antonio
State: TX

Re: need input please

Post by bobmac25 »

Thank you all for the responses and ideas.

Post Reply