I am finishing up the wiring on my 1966 D100 and the blower motor has 4 wires (Green, Red, Yellow and Black). I've read some other articles where the wiring was different on these blower motors.
Currently, the Green and Red Wire were fused together by previous owner and the yellow is a mystery. The black wire appears to be grounded already.
Any thoughts on where these wires should go? I have one power wire coming from my new fuse block to the lower point on the blower switch. This would still leave me with 3 wires on blower motor to deal with.
Anyone have the same wire set up on the blower motor?
Thanks!