hey guys
i have a 1964 short wide d100. my tail light lenses do not have screws holding them in place. they have a snap ring around the perimeter of the lens that seats into the light housing. im not seeing these lights anywhere else. do i have stock lights? did somebody swap them out in the past? the lenses say peterson on the outside. thanks for any help, brian
tail lights
- flyngreenmole
- Sweptline.ORG Member
- Posts: 63
- Joined: Sun Dec 05, 2021 9:43 pm
- City: Sandy
- State: OR
tail lights
your only crazy until your not!
Re: tail lights
they sound stock, the lenses are aftermarket replacement
- flyngreenmole
- Sweptline.ORG Member
- Posts: 63
- Joined: Sun Dec 05, 2021 9:43 pm
- City: Sandy
- State: OR
Re: tail lights
thanks for the reply. im wanting to run clear lenses with red leds inside. im not finding any lens choice except the one with 3 screw holes let alone a clear option!? ill keep looking around. i could probably make any 4” lens work as long as it had no screw holes.
your only crazy until your not!
- flyngreenmole
- Sweptline.ORG Member
- Posts: 63
- Joined: Sun Dec 05, 2021 9:43 pm
- City: Sandy
- State: OR
Re: tail lights
jeff your a genius! searches peterson and found a trailer light company. they offer 4” clear replacement lenses. $14. no screw holes.
your only crazy until your not!