tail lights

Wiring, lights, heater controls, anything electrical..
Post Reply
User avatar
flyngreenmole
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 62
Joined: Sun Dec 05, 2021 9:43 pm
City: Sandy
State: OR

tail lights

Post by flyngreenmole »

hey guys
i have a 1964 short wide d100. my tail light lenses do not have screws holding them in place. they have a snap ring around the perimeter of the lens that seats into the light housing. im not seeing these lights anywhere else. do i have stock lights? did somebody swap them out in the past? the lenses say peterson on the outside. thanks for any help, brian
your only crazy until your not!

jeffc57
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 113
Joined: Wed Feb 01, 2017 2:18 pm
City: vancouver
State: WA

Re: tail lights

Post by jeffc57 »

they sound stock, the lenses are aftermarket replacement

User avatar
flyngreenmole
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 62
Joined: Sun Dec 05, 2021 9:43 pm
City: Sandy
State: OR

Re: tail lights

Post by flyngreenmole »

thanks for the reply. im wanting to run clear lenses with red leds inside. im not finding any lens choice except the one with 3 screw holes let alone a clear option!? ill keep looking around. i could probably make any 4” lens work as long as it had no screw holes.
your only crazy until your not!

User avatar
flyngreenmole
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 62
Joined: Sun Dec 05, 2021 9:43 pm
City: Sandy
State: OR

Re: tail lights

Post by flyngreenmole »

jeff your a genius! searches peterson and found a trailer light company. they offer 4” clear replacement lenses. $14. no screw holes.
your only crazy until your not!

Post Reply