Pics would help.
Am trying to figure out what type of sensor was used with the idiot light setup if I just want to reuse that.
Also if there is a "period" way to replace it with an electric oil gauge and compatible sensor.
If I could adapt the existing cluster and add a column tach is one approach I am looking into ...
Thanks
68 Camper Special Instrument rehab
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1774
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: 68 Camper Special Instrument rehab
The device on the left is an oil pressure switch. If I recall correctly, Mopar oil pressure switches were set to 15psi.
The device on the right is from my 1969 W200. I do have the gauge, so I can get a photo of that too.
.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org