Page 1 of 1
Hood-mounted turn signal wiring
Posted: Sun Sep 25, 2016 2:08 pm
by W500
I have not seen a thread about this, if there is one please direct me to it.
I had to replace the hood on my 1970 D200 Camper Special, the new hood has those chrome turn signals on it. Does anyone know how these were originally wired?
Thanks.
Re: Hood-mounted turn signal wiring
Posted: Thu Sep 29, 2016 6:23 pm
by pwadventurer
The 2 wire harness for the hood turn signals piggy backed with the front turn signal wiring. They are plugged into port 32 (green) and 31 (yellow).Top left looking at fire wall from engine bay. From 2-wire harness, single conductors run up to each indicator.
Re: Hood-mounted turn signal wiring
Posted: Sun Oct 02, 2016 7:05 am
by W500
pwadventurer wrote:The 2 wire harness for the hood turn signals piggy backed with the front turn signal wiring. They are plugged into port 32 (green) and 31 (yellow).Top left looking at fire wall from engine bay. From 2-wire harness, single conductors run up to each indicator.
Thanks for the info