Hood-mounted turn signal wiring

Wiring, lights, heater controls, anything electrical..
Post Reply
User avatar
W500
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 22
Joined: Tue Oct 20, 2015 1:58 pm
City: Clearwater
State: FL

Hood-mounted turn signal wiring

Post by W500 » Sun Sep 25, 2016 2:08 pm

I have not seen a thread about this, if there is one please direct me to it.
I had to replace the hood on my 1970 D200 Camper Special, the new hood has those chrome turn signals on it. Does anyone know how these were originally wired?
Thanks.

User avatar
pwadventurer
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 313
Joined: Wed Dec 31, 1969 6:00 pm
Location: Saylorsburg, Pa.

Re: Hood-mounted turn signal wiring

Post by pwadventurer » Thu Sep 29, 2016 6:23 pm

The 2 wire harness for the hood turn signals piggy backed with the front turn signal wiring. They are plugged into port 32 (green) and 31 (yellow).Top left looking at fire wall from engine bay. From 2-wire harness, single conductors run up to each indicator.

User avatar
W500
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 22
Joined: Tue Oct 20, 2015 1:58 pm
City: Clearwater
State: FL

Re: Hood-mounted turn signal wiring

Post by W500 » Sun Oct 02, 2016 7:05 am

pwadventurer wrote:The 2 wire harness for the hood turn signals piggy backed with the front turn signal wiring. They are plugged into port 32 (green) and 31 (yellow).Top left looking at fire wall from engine bay. From 2-wire harness, single conductors run up to each indicator.
Thanks for the info

Post Reply