Page 1 of 1
Ammeter Questions
Posted: Tue Apr 26, 2016 10:00 am
by FourDoorScore
I'm looking to install a modern, shunted ammeter.
Most are rated a -60 thru +60 amps
Since i have a 65 amp alternator, can i safely use the aforementioned Ammeter?
Does it pull the max amps thru the meter, or only the drawn amps?
thanks all
RW
Re: Ammeter Questions
Posted: Thu Apr 28, 2016 4:38 am
by pwadventurer
The 60 amp shunted amp meter should do fine based on the the rating of the alternator. The gauge will only see the load being used.
Re: Ammeter Questions
Posted: Mon May 16, 2016 7:57 am
by FourDoorScore
thank you very much
Re: Ammeter Questions
Posted: Wed Jun 01, 2016 8:46 pm
by cj7and8
Have you found a replacement ammeter that installs in the original dash location or are you installing a stand alone gauge?
Re: Ammeter Questions
Posted: Fri Jun 24, 2016 7:42 pm
by coelcanth
i am interested to any answer to the previous question,
but also I am wondering:
if i upgrade my alternator to 80A
and i run a new cable direct (no firewall terminal, probably 8 gauge wire)
will i fry my original ammeter or be asking for trouble ?