So.....here we go. Many, many years ago, I removed a wiring harness from a 67 Dodge Dart. Being very careful not to damage anything.
I am now dealing with a burnt up, hacked to death harness in my 69 D100 which will run only on battery power. The Dart harness is in perfect condition and is an almost exact replica of the harness from the Truck, the shape of the bulkhead connectors being the only difference. Any ideas on using the Dart harness? I've checked both wiring diagrams very carefully and don't see any issues. Your input is much appreciated.
My D100 started life as a Winnebago Camper Custom. It now has a stroked 318 with a 727 auto with shift kit. Albeit the rear wnd is a peg-leg with 3:73's, a new Dana 60 goes in around January 2016. My attention is steered towad the harness.
Thoughts?
wiring harness
-
- Sweptline.ORG Member
- Posts: 1
- Joined: Wed Jul 08, 2015 10:00 am
- City: norfolk
- State: VA
- Location: Norfolk, VA
- wally426ci
- Forum Moderator
- Posts: 8151
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Cockeysville
- State: MD
- Location: Earth
Re: wiring harness
All that matters is that the wires go to the same connection so if you can adapt the plug, go for it.