I’ve checked
- fuses good
- flashers good
- 12v going into the switch
- continuity on the switch between red (power) and (yellow,yellow) and (green,green)
What else can I check ?
Signals not working but 4 ways works, brake lights work
-
- Sweptline.ORG Member
- Posts: 267
- Joined: Thu Mar 05, 2015 10:07 am
- City: Wales
- State: ME
- Location: Vacationland
Re: Signals not working but 4 ways works, brake lights work
Have you checked the connection from the stalk to the flasher fuse/flasher module (not sure which it goes to first) for continuity?
When you switch the turn signal on, does the bulb light up and stay that way, or does it stay dark?
When you switch the turn signal on, does the bulb light up and stay that way, or does it stay dark?
1969 D100 w/an A833 & a 318
1984 W150 w/a 7.5 Fisher Speedcast, an NP435 & a slant six (because slow but unstoppable!)
1984 W150 w/a 7.5 Fisher Speedcast, an NP435 & a slant six (because slow but unstoppable!)
- 66patrick
- Sweptline.ORG Pioneer
- Posts: 5038
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Central
- State: OK
- Location: OK
Re: Signals not working but 4 ways works, brake lights work
I had a similar problem that kept migrating from good taillights and no brake lights, to no taillight or brakelights, but good t/s lights. Turned out to be a bad ground inside one of the taillight housings.
[b]Patrick - 1969 D300 cab & chassis[/b]