1967 Dodge Wiring Harness
-
- Sweptline.ORG Member
- Posts: 61
- Joined: Sun Jan 08, 2012 11:16 pm
- City: chappell
- State: NE
1967 Dodge Wiring Harness
Does anyone make a completely new Harness for the 67 Dodge D100?
MOPAR. Massively Over Powered And Respected
- wally426ci
- Forum Moderator
- Posts: 8151
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Cockeysville
- State: MD
- Location: Earth
-
- Sweptline.ORG Member
- Posts: 18
- Joined: Mon Mar 09, 2015 2:00 pm
- City: Clearfield
- State: UT
Re: 1967 Dodge Wiring Harness
Have you checked out Ron Francis, Painless, american auto wire? Im new to sweptlines hope it helps
Brandon
Brandon
- soopernaut
- Sweptline.ORG Pioneer
- Posts: 8929
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Des Moines,IA
Re: 1967 Dodge Wiring Harness
It isn't stock, but yes.wilmothcody wrote:Does anyone make a completely new Harness for the 67 Dodge D100?
https://www.ronfrancis.com/prodinfo.asp?number=XP%2D693
Re: 1967 Dodge Wiring Harness
I'm planning on using this harness (Ron Francis) on my 69 D300. It was my grandpas truck and under the dash looks like spaghetti. Anyone have any pointers for me? It sure looks like a nice unit.
Re: 1967 Dodge Wiring Harness
Has anyone tried this harness set up out yet.? Just pulled the trigger on another harness set up (1st was a rebel wiring, 2nd is a painless wiring). But I haven't opened up the box on the p.w. one, so it could be returned...
Anybody.??
Anybody.??
My truck, '66 W200 Crewcab. Got any parts.?
- rmansberger
- Sweptline.ORG Member
- Posts: 101
- Joined: Wed Oct 02, 2013 2:44 pm
- City: East Lansing
- State: MI
- Location: East Lansing, MI
- Contact:
Re: 1967 Dodge Wiring Harness
The Painless harnesses are easy to work with. Everything is labeled and correct.
I used their harness on my 67 Mustang restoration and it was perfect. I can't see where this application would be any different. This product is preferred by Stacey David of Gearz and he only uses the best.
Check out Stacey'a site at http://www.staceydavid.com Stacey's Blackbook of parts suppliers is a great resource and he has clips from his show that you can checkout referencing the installation and use of Painless wiring harnesses.
I used their harness on my 67 Mustang restoration and it was perfect. I can't see where this application would be any different. This product is preferred by Stacey David of Gearz and he only uses the best.
Check out Stacey'a site at http://www.staceydavid.com Stacey's Blackbook of parts suppliers is a great resource and he has clips from his show that you can checkout referencing the installation and use of Painless wiring harnesses.
Rick Mansberger
1967 Mustang "Duke"
1970 Dodge D100 "The Dude"
1978 GMC Suburban "Big Cub"
2006 C300
2014 RAM Limited "Master Sergeant"
517.599.7667
1967 Mustang "Duke"
1970 Dodge D100 "The Dude"
1978 GMC Suburban "Big Cub"
2006 C300
2014 RAM Limited "Master Sergeant"
517.599.7667