My '65 front directional light solution.....

Wiring, lights, heater controls, anything electrical..
Post Reply
User avatar
fusc
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 132
Joined: Fri Apr 26, 2013 8:20 pm
City: Riceville
State: TN

My '65 front directional light solution.....

Post by fusc »

I simply refuse to pay what the replacement lenses cost, especially since there is nothing original about my build.

So I found these sealed lights at my local Carquest. (They sell them under their own product line with the same part number)

Image

I used the old light pockets as hold downs and cut them to fit around the plug and shape.....

Image

You could make your own hold down if your didn't want to cut them up. And if you did that, It would be super easy to back to original if you ever stepped into cheap lenses.

Used #8 x 32 x 1 1/2" bolts with finishing washers on the front......

Image

Post Reply