I know this has been covered probably many times but I need to hear it again. If I install a Blaster 2 coil with my electronic ignition can I remove/bypass the ballast resistor? Or is the ballast protecting the ignition box?
Thanks
Jim
Blaster 2 coil
-
mopardwh
- Sweptline.ORG Pioneer
- Posts: 4356
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Longview
- State: TX
- Location: Back in the U.S.
- Contact:
Re: Blaster 2 coil
Ignition box.
-
nfury8
- Sweptline.ORG Pioneer
- Posts: 2443
- Joined: Wed Dec 31, 1969 6:00 pm
- City: KC, MO
- Location: Kansas City
- Contact:
Re: Blaster 2 coil
Agreed.
I had just this discussion with Rick Ehrenberg, the tech editor from Mopar Action a few years ago.
He says the ignition box requires the requisite 7v the ballast provides, and will have a short life at 12v.
I had just this discussion with Rick Ehrenberg, the tech editor from Mopar Action a few years ago.
He says the ignition box requires the requisite 7v the ballast provides, and will have a short life at 12v.
Re: Blaster 2 coil
Thanks guys.