Hey all, I went to swap out my 69 d200 gauges for a later HD set... I wired everything up, had a smoke show...
Good thing I labeled everything before I took it off.....
SO, I said "F" it and I put the old/orginal cluster back in...now when I turn the key, I dont get any engine firing...it fired off before without problem. I can say that I have power to my turn signals, wipers, dash lights.
Suggestions??? mattc
What did I do???
- centralwildcat
- Sweptline.ORG Member
- Posts: 361
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Bellingham Washington
- Jeffc
- Sweptline.ORG Pioneer
- Posts: 1954
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Vancouver, WA
- Contact:
cranking but no fire? or no cranking?
On a 69 could be fuseable link......
should be in the harness to the firewall
plug under the hood....often a blue or red wire
could be ballast, it would want to fire
when starting and then die as soon as
you turn the key to 'run'.....
On a 69 could be fuseable link......
should be in the harness to the firewall
plug under the hood....often a blue or red wire
could be ballast, it would want to fire
when starting and then die as soon as
you turn the key to 'run'.....
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
- centralwildcat
- Sweptline.ORG Member
- Posts: 361
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Bellingham Washington
Smoke show
No luckily the smoke show was just the wire that I fried, from the tach... I had it wired the wrong way.
So now it wont even crank over...its like I turn the key on, and all I get is the power I would normally get as if the key was in the "accesory" position.... I saw a fusable link under there somewhere, I'll go check that! Thanks, mattc
So now it wont even crank over...its like I turn the key on, and all I get is the power I would normally get as if the key was in the "accesory" position.... I saw a fusable link under there somewhere, I'll go check that! Thanks, mattc
- centralwildcat
- Sweptline.ORG Member
- Posts: 361
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Bellingham Washington
well...
I couldn't find the fuseble link...did end up changing the ballast resitor on GP...I used my tester light and found that I have juice to the ignition, but still nothing when I turn the key....just the acceroies coming on...
any other thoughts???? [/quote]
any other thoughts???? [/quote]
- Jeffc
- Sweptline.ORG Pioneer
- Posts: 1954
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Vancouver, WA
- Contact:
Bad switch? test at the I-1 post with key on...
no power passing, bad switch....
no power passing, bad switch....
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!