1969 D100 Wiring Diagram

Post by **HellBelly** » Wed Oct 06, 2004 7:32 am

Ok this is long shot at best.

Does anybody have a wiring diagram that depicts the entire wiring for a 1969 D100 Adventure with Air Conditioning and 4 Gauge Cluster with Tach? I doubt it, but I had to ask, you never know.

If nobody has the above, can some PLEASE PLEASE send me via snail mail a good copy of the standard wiring schematic like the one below? This one is to blurry to even read properly.

1969 D100 Wiring Schematic

http://www.sweptline.com/tech/69wire.jpg

Post by **HellBelly** » Fri Oct 08, 2004 10:12 am

Come on guys someone has to have a wiring schematic like the link above. PLEASE

Website · Post by **wideblock** » Fri Oct 08, 2004 5:14 pm

ill check the book that came with my crew this weekend, its a motors manual, but they are usually pretty good about stuff like this.

Post by **HellBelly** » Mon Oct 11, 2004 10:00 am

Thanks Trey, I had a few minutes over the weekend and looked over the truck, man the wiring is hosed! Wonder why someone would disconnect the plug that goes to the transmission (Automatic)?

The four Gauge cluster that's in it with the Tach is factory, but dang the wires are going all over the place and look noting like the standard harness. This is going to take some time to sort out. I really need a good clear schematic.

Butch Romig · Post by **Butch Romig** » Mon Oct 11, 2004 2:50 pm

scot
ask on norms forum,i bet one of the "older" guys has one,or.isnt there one on krisses site?
butch

Website · Post by **wideblock** » Mon Oct 11, 2004 5:06 pm

the book i have is pretty useless for anything other then general maintenance. guess ill be on the look out for a service manual for the 69. one thing i can tell you, from the experience of removing 2 wireing harnesses, dodge didnt exactly put them in neat. it may be a factory rats nest!

Post by **HellBelly** » Tue Oct 12, 2004 8:04 am

Thanks Butch that's a good idea.

Trey, the harness behind the gauges is definitely factory. It's got factory wire extension on various wires to make them reach the gauges. Looks like a rats nest for sure!

zdatdodge · Post by **zdatdodge** » Thu Nov 18, 2004 6:45 pm

Im fixing my rats nest by installing painless.
Im glad Im not the only one with rat wires.

Hoss · Post by **Hoss** » Fri Nov 19, 2004 11:02 am

I may have one but I can't get to it untill tomorrow to see if its the one your looking for.
Ken

Hoss · Post by **Hoss** » Sat Nov 20, 2004 5:37 pm

Sorry thought I had one but no such luck. If you have a local library you may try there. I've had some descent luck finding repair info at our local library.
Ken

pwadventurer · Post by **pwadventurer** » Sun Dec 05, 2004 4:50 pm

Scott,I sent you two e-mails w/ attachments.One is of the ac unit wiring, and one of the 4-guage cluster.this is out of my service manual.If you want the hard copy, i can mail them to you.
Rick
rsc68440@epix.net

Post by **HellBelly** » Sun Dec 05, 2004 10:39 pm

Rick,

I got both of the e-mails...

They're exactly what I was looking for. I see the Wiring for the extra equipment oil gauge also...

Much appreciate, no need for the hard copy your scans were crystal clear.

Thanks again!

Sweptline.ORG

1969 D100 Wiring Diagram

1969 D100 Wiring Diagram

69-71 wiring diagram

E-mails