Dodge 6 Bolt 16 inch tubeless rims
Dodge 6 Bolt 16 inch tubeless rims
Did Dodge make 6 bolt tubeless 16 inch rims for the 1 ton chassis? If so, I need eight rims. Thanks...Greg
- wideblock
- Founding Member
- Posts: 5617
- Joined: Wed Dec 31, 1969 6:00 pm
- City: las cruces nm
- State: NM
- Location: Las Cruces, New Mexico
- Contact:
hey greg, check with stockton wheel company. my dad bought 6 lug 16" wheels for a 41 gmc dually from them. if they have or make those, im sure they can hook you up with what you need. and dad claimed the price was about the same as a custom steel wheel for any other truck would have been.
http://www.stocktonwheel.com
http://www.stocktonwheel.com
Trey
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
I've done some investigation on this and if you have a set of rims that are in good condition you should be able to have the centers removed and installed on a non split wheel. If your centers are beyond repair then you'll have to find some that you could use. Stockton does not have or make the ofset dual wheels with the 6 lug 7.25" bolt pattern that us 1 ton guys need. Some of the Ford guys are having the same problem. Last I heard Stockton had some 17.5 wheels with this bolt pattern but who wants em if you can't buy tires.
- wideblock
- Founding Member
- Posts: 5617
- Joined: Wed Dec 31, 1969 6:00 pm
- City: las cruces nm
- State: NM
- Location: Las Cruces, New Mexico
- Contact:
hey hoss, you are correct about stockton not carrying the wheels. after another discussion with dad, i realized i under stood him wrong. all they did was weld his centers into a one piece outer rim and powder coat the assembly. sorry for the misunderstanding.
Trey
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
- MowagW200
- Sweptline.ORG Member
- Posts: 195
- Joined: Wed Dec 31, 1969 6:00 pm
- City: 5417
- State: Foreign
- Location: Untersiggenthal and Steg im Toesstal, Switzerland
- Contact:
Thanks a lot, Trey for the hint. I asked the company for rims. I ordered one 7*16 rim with 4.5" backspacing to test on my truck. The old split rims, mounted on my truck have more or less the same BSM. If it fits and holds a 235/85R16 tubeless tire, I'll use it as a spare wheel and gonna order four more rims of the same specification and kick off the hated split rims.
Dieter
Mowag W200, 318 A, 200 HP, 4.88 axle, NP 420 4 speed - 2281199520 (on the frame)
1956 Chrysler New Yorker Newport, 354 HEMI, 2 speed powerflite, N56L3495
Mowag W200, 318 A, 200 HP, 4.88 axle, NP 420 4 speed - 2281199520 (on the frame)
1956 Chrysler New Yorker Newport, 354 HEMI, 2 speed powerflite, N56L3495