Is it possible to switch the axles from a pre '64 to a post '65 type without switching out the diff?
Thanks!
Tapered to Flanged swap...Differential needed?
Tapered to Flanged swap...Differential needed?
1961 Dodge D-100
Alberta, Canada
Alberta, Canada
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Re: Tapered to Flanged swap...Differential needed?
Just the axle. Nope. Early has nut on axle. Later is bolted through flange. I’m replacing my 64 now. Craig
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
Re: Tapered to Flanged swap...Differential needed?
Thanks Craig. Is there a step by step guide I can get a hold of?
1961 Dodge D-100
Alberta, Canada
Alberta, Canada
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Re: Tapered to Flanged swap...Differential needed?
Clarify what you're asking. If you replace the entire differential, get a manual. You have to disconnect brake lines, drive shaft, parking brake, leaf springs, install new diff, bleed brakes etc. Take out old put in new assembly. Get a mechanic buddy to help, pretty much basic operation. Now if you want to rebuild one, then there are specialized tools needed and not for the inexperienced.
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251