Adding Power Steering with A/C

aqmet · Post by **aqmet** » Fri Oct 04, 2019 5:10 am

Does anyone have a truck that has A/C and power steering?

I have a 1964 D100 Town Wagon with 318 Poly and NP435. The truck currently has A/C and I want to add CPP power Steering to it. I have purchased most of the parts, but I’m trying to figure out the best way to route the belts for the power steering ,alternator and A/C.

Any help would be appreciated.

Thanks Mike

Txas2step · Post by **Txas2step** » Fri Oct 04, 2019 6:44 am

I don't have AC on my Poly but have a 3 belt lower pulley on my '67 D100. Altenator on one, P steering pump on second, third open. Not sure , but would suspect all 3 on independent belts.

edit: this is not a poly /truck but should be same principle ( small block Dart w/ ac/ps)

Sweptline.ORG

Adding Power Steering with A/C

Adding Power Steering with A/C

Re: Adding Power Steering with A/C