1964 wheels

Suspension, Brakes, Tires, Wheels steeringetc..
Post Reply
User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1335
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA
Contact:

1964 wheels

Post by powerwagon54 »

Does anyone have a 1964 brochure that lists the wheel sizes available for a 200 series?

User avatar
soopernaut
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 8931
Joined: Wed Dec 31, 1969 6:00 pm
Location: Des Moines,IA

Re: 1964 wheels

Post by soopernaut »

I think I have an early 65 brochure. It says 7/64 on it. It does not list wheel sizes but does list tire sizes. It does not cover 4wd either. For D200s the tire sizes listed are 6.50-16.6 and 8-19.5-8. I believe it is a misprint and should say 6.50-16-6. The last number after the dash is the ply rating. The 61 brochure and late 65 brochure are the same and list 6.50-16-6 and not 6.50-16.6.

User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1335
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA
Contact:

Re: 1964 wheels

Post by powerwagon54 »

no mention of any other sizes, right. I have a customer swearing that his 64 came with 10.00 x 16.5 wheels on a D200. By my books they were not even offered until 69.

User avatar
soopernaut
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 8931
Joined: Wed Dec 31, 1969 6:00 pm
Location: Des Moines,IA

Re: 1964 wheels

Post by soopernaut »

The parts book has a few more sizes, like 17 (for export) and 17.5 (use as required). I do not see any 16.5s but you never know. I've also seen SERT numbers for wheels.

User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1335
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA
Contact:

Re: 1964 wheels

Post by powerwagon54 »

According to the internet the 16.5 wheel was not even developed until 1966. And all the dodge and hollander books I have show dodge did not use them until 69. I think this is a dead end. No way of knowing what wheel was used or if it was in fact used.

PwrWgnDrvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 7362
Joined: Wed Dec 31, 1969 6:00 pm
Location: Walnut Creek, CA

Re: 1964 wheels

Post by PwrWgnDrvr »

Tell your customer to provide verifiable proof/documentation that it is factory. Its impossible to prove a negative. No available evidence supports his claim.

SEAnthony
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 51
Joined: Mon Dec 01, 2008 5:11 pm
City: middle
State: GA

Re: 1964 wheels

Post by SEAnthony »

attachment is from the online reference catalog
Attachments
Online reference catalog.gif

SEAnthony
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 51
Joined: Mon Dec 01, 2008 5:11 pm
City: middle
State: GA

Re: 1964 wheels

Post by SEAnthony »

Sorry, I didn't realize my attachment would look so blurry. Click on the attachment and then enlarge it.

User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1335
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA
Contact:

Re: 1964 wheels

Post by powerwagon54 »

what is it you are trying to show us. They are no 16.5 wheels in that list as we have already determined.

User avatar
Hobcobble
Forum Moderator
Forum Moderator
Posts: 14573
Joined: Wed Dec 31, 1969 6:00 pm
Location: Lockport, NY

Re: 1964 wheels

Post by Hobcobble »

powerwagon54 wrote:
Tue Sep 18, 2018 12:27 pm
no mention of any other sizes, right. I have a customer swearing that his 64 came with 10.00 x 16.5 wheels on a D200. By my books they were not even offered until 69.
Tell him to quit swearing. :joker I've never seen a 16.5" one piece wheel on a Sweptline earlier than
a '69. The 16 [lock ring], 17.5 one piece and 19.5 one piece were probably the choices, as they're
listed in my '62 catalog.... :2cents

John

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4038
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 1964 wheels

Post by 712edf »

The 1965 brochure on old Dodges shows 16x5.5 wheels on D200, D200 crew cab & W200 with the Camper packages. I don't know if the other 200 series uses something different.

Bucky
1966 W500
1975 W600
1978 W200 club cab

User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1335
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA
Contact:

Re: 1964 wheels

Post by powerwagon54 »

that is 16 inch, not 16.5

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4038
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 1964 wheels

Post by 712edf »

Correct. I was replying to the original question.

Bucky
1966 W500
1975 W600
1978 W200 club cab

dbolterII
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 45
Joined: Fri Jan 04, 2019 11:49 pm
City: capitol
State: MN

Re: 1964 wheels

Post by dbolterII »

Hey all, Hopefully not too off topic, does anyone know the paint color or code for 1964 d~100 off white wheels?/? thx ~d

Post Reply