Need help with D200 tire size
- 69PowerWagon
- Sweptline.ORG Member
- Posts: 323
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Los Banos
- State: CA
Need help with D200 tire size
I need to get new tires on my D200 and the book says its supposed to have 8.75-16.5-E tires. I have been trying to find a modern size in a 16in tire to replace the 16.5's but can't find one. Have any of you found a good replacement tire for this size?
1952 B3GA truck
1971 D200 440 727
1976 D200 318 4spd
1971 D200 440 727
1976 D200 318 4spd
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3016
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Need help with D200 tire size
69PowerWagon wrote:I need to get new tires on my D200 and the book says its supposed to have 8.75-16.5-E tires. I have been trying to find a modern size in a 16in tire to replace the 16.5's but can't find one. Have any of you found a good replacement tire for this size?
Start by getting rid of the 16.5 rims and go with 16 inch ones.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
- 69PowerWagon
- Sweptline.ORG Member
- Posts: 323
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Los Banos
- State: CA
Re: Need help with D200 tire size
I do have a set of 16in rims on it already but the tires on the truck are the wrong size and falling apart. I'm looking to get tires as close to the original size as possible minus the 16.5 part.
1952 B3GA truck
1971 D200 440 727
1976 D200 318 4spd
1971 D200 440 727
1976 D200 318 4spd
Re: Need help with D200 tire size
What I see is that the 8.75 X 16.5 is 29.46" tall and 8.8" wide. So something like 225 75R16 (29.30" X 8.9").
1971 Dodge D100
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?
- WanderingDodge
- Sweptline.ORG Member
- Posts: 10
- Joined: Thu Jan 16, 2014 3:54 pm
- City: Holyweed
- State: CA
Re: Need help with D200 tire size
265/70/16's on all four corners has been good to me.
“All that was great in the past was ridiculed, condemned, combated, suppressed — only to emerge all the more powerfully, all the more triumphantly from the struggle.”
― Nikola Tesla
― Nikola Tesla
Re: Need help with D200 tire size
I had 235/85-16s on mine. nice size and good ride
Harold Davidson
Cesspool of knowledge. All kinds of useless $$hit floating around.
1970 D200
-
- Sweptline.ORG Member
- Posts: 452
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Need help with D200 tire size
I had 235 /85/16 on my w 200 but didn’t like the look. Now it has 33/12.50.16.5. It fills the wheel well much better. I like it.
Try going through the photo section here and then message the person who has the look you prefer and ask what size the tires are.
Keep in mind there are a lot of lowered trucks. The ride height changes the look too, even with the same tire.
Try going through the photo section here and then message the person who has the look you prefer and ask what size the tires are.
Keep in mind there are a lot of lowered trucks. The ride height changes the look too, even with the same tire.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear