95 Dodge Van frame swap candidate or drivetrain?

Suspension, Brakes, Tires, Wheels steeringetc..
Post Reply
User avatar
my5thmopar
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1002
Joined: Thu Aug 08, 2013 8:51 pm
City: Columbia
State: TN

95 Dodge Van frame swap candidate or drivetrain?

Post by my5thmopar »

I found a 80K 1995 Dodge1/2 ton van with a 5.2 and 46rh. It has a109 inch wheel base but, I could not find the track width. In either case, I'm thinking about buying it. I can get it for 5-800. It has a bad fuel pump but, owners son says will start with gas down the throttle. Any thoughts or suggestions regarding the project? BTW it was parked 12 years ago and they have tinkered with it a time or two since. That concerns me a little.

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4019
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by 712edf »

Are you wanting it for the drivetrain only? or are you thinking of doing some kind of chassis swap?

Bucky
1966 W500
1975 W600
1978 W200 club cab

User avatar
my5thmopar
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1002
Joined: Thu Aug 08, 2013 8:51 pm
City: Columbia
State: TN

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by my5thmopar »

Not sure but, If the frame is doable I would consider it. If not, then I would just use the drivetrain.

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4019
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by 712edf »

The biggest headache with a van is you generally have to remove the engine from the bottom. So either way you are stuck getting that body off of the frame.

Bucky
1966 W500
1975 W600
1978 W200 club cab

User avatar
my5thmopar
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1002
Joined: Thu Aug 08, 2013 8:51 pm
City: Columbia
State: TN

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by my5thmopar »

712edf wrote:The biggest headache with a van is you generally have to remove the engine from the bottom. So either way you are stuck getting that body off of the frame.

Bucky

I have a loader, winches, come along and a buddy with a lift with 30ft ceilings. He would probably assist. He is a nice guy. So does anyone think the frame swap would work? If not, maybe I should go a different route.

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4019
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by 712edf »

Sounds like you have the tools/equipment needed. What are you wanting to swap with?

I guess you should do some measuring & comparisons between the two. Almost anything can be made to work, given enough resources.

Bucky
1966 W500
1975 W600
1978 W200 club cab

User avatar
soopernaut
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 8929
Joined: Wed Dec 31, 1969 6:00 pm
Location: Des Moines,IA

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by soopernaut »

712edf wrote:The biggest headache with a van is you generally have to remove the engine from the bottom. So either way you are stuck getting that body off of the frame.

Bucky
The biggest headache will be trying to get the body off the frame of a unibody van. :lol:

User avatar
MadMC63
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 794
Joined: Sat Nov 14, 2015 12:16 pm
City: Rome
State: GA

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by MadMC63 »

I wondered if someone was going to mention the uniframe.
1971 Dodge D100
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4019
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by 712edf »

I figured a 95 van would have a front subframe, or at least the front suspension/crossmember would need to be dropped. I was concentrating on him getting the motor/tranny out, overlooked what he was saying about putting a truck body on a van "frame". :lol:

I haven't dealt with any Dodge vans newer than 70's. The only van I have ever removed a engine from was wrecked 90 Chevy. It was a headache. Same for motorhomes.

He is going to have to do some dismantling to get that drivetrain out to swap it into anything else, that's a given.

Bucky
1966 W500
1975 W600
1978 W200 club cab

User avatar
soopernaut
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 8929
Joined: Wed Dec 31, 1969 6:00 pm
Location: Des Moines,IA

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by soopernaut »

I think most remove van engines from inside through the door.

User avatar
my5thmopar
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1002
Joined: Thu Aug 08, 2013 8:51 pm
City: Columbia
State: TN

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by my5thmopar »

soopernaut wrote:
712edf wrote:The biggest headache with a van is you generally have to remove the engine from the bottom. So either way you are stuck getting that body off of the frame.

Bucky
The biggest headache will be trying to get the body off the frame of a unibody van. :lol:
I had no idea so, Im glad you did mention this. It sounds like I need to stick with a truck for a drivetrain. Thanks guys for all the comments. Craig

User avatar
dodgeboykim
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 3003
Joined: Wed Dec 31, 1969 6:00 pm
City: Chilliwack. B.C. Canada
State: Foreign
Location: chilliwack.

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by dodgeboykim »

my5thmopar wrote:
soopernaut wrote:
712edf wrote:The biggest headache with a van is you generally have to remove the engine from the bottom. So either way you are stuck getting that body off of the frame.

Bucky
The biggest headache will be trying to get the body off the frame of a unibody van. :lol:
I had no idea so, Im glad you did mention this. It sounds like I need to stick with a truck for a drivetrain. Thanks guys for all the comments. Craig



Engine, Trans, electrical if used can all be used in a pick up. Frame on a Van to me is not compatible. Possibly some parts. Engine in the van will come out through front also.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.

PwrWgnDrvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 7339
Joined: Wed Dec 31, 1969 6:00 pm
Location: Walnut Creek, CA

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by PwrWgnDrvr »

I'd torch skilsaw and sawzall the body out of the way and cherry pick the engine straight up!

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4019
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: 95 Dodge Van frame swap candidate or drivetrain?

Post by 712edf »

He DID mention he had a loader.

He didn't mention what the engine/trans were going into.

Bucky
1966 W500
1975 W600
1978 W200 club cab

Post Reply