Shake what did I do?
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Shake what did I do?
70 D200. I repacked the bearings, replaced seals and adjusted the front brakes. Now I have a bad shake under any acceleration. Doesn't seem to do it if I coast. Everything seems tight and nothing wobbling when jacked up. Now I'm wondering If I did something or this is coincidental. Kind of acts like a engine miss but, seems to run OK. Any ideas if somethings up with the suspension before I look elsewhere? Thanks Craig
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
Re: Shake what did I do?
Typicaly if front end parts are bad you'll get a side to side movement in the steering wheel and if tires are a problem you'll get an up and down vibration/movement in the steering wheel. Engine miss fires create a noticable vibration when the engine is under a load and subside when the load is released. I guess the question is do you feel the vibration in the steering wheel or through the body of the truck? Seat of the pants or hands.
1971 Dodge D100
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?
-
- Sweptline.ORG Member
- Posts: 223
- Joined: Mon Dec 27, 2010 4:49 pm
- City: Ijamsville
- State: MD
Re: Shake what did I do?
I've had a similar issue that turned out to be a tire. Did you rotate your tires while they were off? Try swapping them to the rear one at a time and see if the issue stops.