Master Cylinder Cap

Suspension, Brakes, Tires, Wheels etc..

Master Cylinder Cap

Postby 61stepside » Thu Nov 23, 2017 11:34 am

Is there suppose to be a washer under the bolt that holds down the master cylinder cap on my 61? When the brakes are applied, air bubbles come from around where the hold down bolt goes through the cap.
61stepside
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 72
Joined: Fri Jun 30, 2017 8:01 pm
City: SoCal
State: CA

Re: Master Cylinder Cap

Postby Jim100 » Thu Nov 23, 2017 5:10 pm

I think there is a washer on my clutch master which may be similar to your brake. Single pot?
jim
Jim100
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 460
Joined: Sun May 03, 2009 6:16 pm
City: Kalamazoo/MI

Re: Master Cylinder Cap

Postby 61stepside » Thu Nov 23, 2017 9:24 pm

Yes, single pot.
61stepside
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 72
Joined: Fri Jun 30, 2017 8:01 pm
City: SoCal
State: CA

Re: Master Cylinder Cap

Postby Jim100 » Fri Nov 24, 2017 12:52 pm

It looks copper colored on mine.
Jim100
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 460
Joined: Sun May 03, 2009 6:16 pm
City: Kalamazoo/MI

Re: Master Cylinder Cap

Postby 61stepside » Fri Nov 24, 2017 4:32 pm

Thanks Jim. When I went to check the fluids, the clutch cylinder didn't have a gasket but the brake cylinder had two. I believe the trucks previous owner must have screwed this up along with losing the washers.
61stepside
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 72
Joined: Fri Jun 30, 2017 8:01 pm
City: SoCal
State: CA


Return to *SUSPENSION/BRAKE HELP*

Who is online

Users browsing this forum: No registered users and 1 guest

cron