Sweptline.ORG

Hello Mopar Friends. We've been getting tons of requests to design a Disc Brake Conversion Kit for the Dodge D300 Truck.

WE OFFICIALLY RELEASED OUR BRAND NEW D300 DISC BRAKE CONVERSION KIT TO THE PUBLIC TODAY! See our two videos that were posted today:

https://www.youtube.com/watch?v=T9i7tYHKUL4

https://www.youtube.com/watch?v=4eywPK3AG6U

We also made some new and improved revisions to our existing D200 Disc Brake Conversion Kit, which was also officially released today. See the following two videos:

https://www.youtube.com/watch?v=do7YAA17e-o

https://www.youtube.com/watch?v=h3sqPh87vEU

The D200 Kit is currently listed on our website at the following link (photos to be updated later):
http://therammaninc.com/products/shop_v ... ION-KIT-59

The D300 Kit will be listed as well very soon. In the mean time, you can call us for pricing at 817-429-0105.

We wanted to share this news with you not to solicit, but to help our fellow Mopar brothers, since so many of you have been in search for these Disc Brake Kits for your D200 & D300's.

Wishing you all the best! And happy Moparing!

Wayne Brown (The Ram Man)
http://www.TheRamManINC.com
817-429-0105

Do any of your kits fit this spindle. Thanks.

Hi Kurt. That actually looks like a 'car' spindle, as it is a horizontal spindle. General rule is, truck spindles are vertical and car spindles are horizontal. Where did you get the spindle?

Here is a photo of a D100 Stock Spindle as an example.

Kurt's photo is a 4,000 lb front axle. An "Elliott" axle, as opposed to the "Reverse Elliott" posted below.

The spindle is on my 1965 D200 Crew and is original as far as I know. There are other Crews I have seen with it. I made disc brakes for it that are good but would rather have something from a pro.

Ahhhhh, understood. Thanks for the catalog post from soopernaut.

Kurt, we've obtained the data and dimensions of this particular spindle and are in the process of modifying our adapter plate to also work with spindle as well. We'll keep you posted when this revision is available (which will be soon!)

Thanks!