New project... lift questions
Posted: Wed Apr 06, 2016 3:39 pm
I bought a 68 crewcab d200 camper special few months ago. I've been gathering parts for a cummins swap and I'd like to lift it a bit and run some 35-12.50-20s.
My question is has my truck been lowered or settled this much?
Front end is only 3 inches from bump stops on 33-12.50s ...this is how I got it. The front springs seem very flat and it only has a 318 in it at the moment.
Rear has helper spring, no blocks, and seems stock to me...has 6 inches between bumps top and axle.
Any advice or help would be awesome!
My question is has my truck been lowered or settled this much?
Front end is only 3 inches from bump stops on 33-12.50s ...this is how I got it. The front springs seem very flat and it only has a 318 in it at the moment.
Rear has helper spring, no blocks, and seems stock to me...has 6 inches between bumps top and axle.
Any advice or help would be awesome!