D200 crew cab king pin help

Suspension, Brakes, Tires, Wheels steeringetc..
Post Reply
Oshork67
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 29
Joined: Sun Aug 30, 2015 6:35 pm
City: East Haven
State: CT

D200 crew cab king pin help

Post by Oshork67 »

image.jpg
image.jpg (20.18 KiB) Viewed 609 times
I'm trying to remove my spindles and king pins it looks like there I a pin pressed in the front of the spindle retaining the king pin. The back has a open hole I'm assuming I need to drive the pin out to remove the king pin. The large hole is where the keyed steering arm bolts in. Any help would be appreciated.
Attachments
image.jpg
image.jpg (7.18 KiB) Viewed 609 times

User avatar
Hobcobble
Forum Moderator
Forum Moderator
Posts: 14573
Joined: Wed Dec 31, 1969 6:00 pm
Location: Lockport, NY

Re: D200 crew cab king pin help

Post by Hobcobble »

Although this diagram is for the D400 axle, it might help you. :idea :Thumbsup
http://www.sweptline.org/suspension63_68/02-08.gif

John

Oshork67
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 29
Joined: Sun Aug 30, 2015 6:35 pm
City: East Haven
State: CT

Re: D200 crew cab king pin help

Post by Oshork67 »

That does help thanks I guess a little time with a punch and BFH is in order :Thumbsup

User avatar
kurt
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 414
Joined: Mon Aug 20, 2012 4:39 pm
City: Meridian
State: ID

Re: D200 crew cab king pin help

Post by kurt »

I took my crew axle to a machine shop that also had the proper reamer to do both top /bottom at the same time.
1965 D200 Crew 5.9L MPFI/A518

Post Reply