Page 1 of 1
Brake proportioning valve for disc swap
Posted: Mon Sep 14, 2015 10:19 am
by RUSTYTOOLSS
I have a 1964 dodge a100 pickup, and am installing front disc brakes. From what I have found out, the A100 pickup weighs around 3000lbs. I need to find a brake proportioning valve . I've located a 1987 D150 (unsure of engine/options/pullapart). Would anyone here know what the weight of the 87 D150 might be ? Would the proportioning valve be a good choice to use on my 64 A100 pickup ?
I should also note that the brake system is manual brakes..not power.
Re: Brake proportioning valve for disc swap
Posted: Mon Sep 14, 2015 8:26 pm
by dodgeboykim
Re: Brake proportioning valve for disc swap
Posted: Mon Sep 14, 2015 9:55 pm
by Txas2step
This is what I used on my conversion to scarebird this past weekend...works great.
http://www.ebay.com/itm/GM-PROPORTIONIN ... 210wt_1001
Re: Brake proportioning valve for disc swap
Posted: Wed Sep 16, 2015 10:14 am
by RUSTYTOOLSS
I did locate a 1987 Dodge D150. Unsure of weight and options. Possible choice ?
Re: Brake proportioning valve for disc swap
Posted: Wed Sep 16, 2015 10:39 am
by Hobcobble
RUSTYTOOLSS wrote:I did locate a 1987 Dodge D150. Unsure of weight and options. Possible choice ?
Yes.
John
Re: Brake proportioning valve for disc swap
Posted: Wed Sep 16, 2015 5:32 pm
by swptln
RamMan.com has everything you will need and it wont be aftermarket or brand X stuff. You will have to call him, he doesn't have much stuff listed on his site.
http://www.theramman.com/
Re: Brake proportioning valve for disc swap
Posted: Fri Jan 08, 2016 4:05 pm
by tbagger70
Im trying to add disc brakes to the front of my a100 pickup. Where did you get yours or what did you use??
Thanks in advance
Tom