new box power steering

Suspension, Brakes, Tires, Wheels etc..

Re: new box power steering

Postby earlymopar » Sun Dec 10, 2017 7:44 am

Absolutely. Having the CORRECT power steering pump pulley diameter (relative to the driven pulley diameter) only allows the pump pressure to be optimized for the pump being used. If the pump is not capable in design, adjustments or pulley changes of reaching the necessary PSI , the pump is obviously the limiting factor. One would really need to look at the rated PSI range of their pump before hand to see if it's even capable of getting to the target PSI.

- EM
earlymopar
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 211
Joined: Thu Sep 22, 2011 11:37 am
City: Newberg
State: OR

Re: new box power steering

Postby Peero » Sun Dec 17, 2017 11:05 am

How firm steers the CPP Power Steering unit? I would compare this to my Firm Feel Stage III Power Steering unit in my car (1964 Dodge 440) which steers like a modern car.


What about running a cross steering Rack & PInion Unit from Unisteer? I'm looking at item 8000460-04. Fabricating the cross steer shouldn't be a n issue,
you could than attach two heim joints on the passenger side steering arm. One heim joint above the steering arm links to the stock Draglink.
The second Heim Joint links to the cross steer r&p unit.You'll end up with two draglinks which hopefully do not contact each other.

Any thoughts....


Thx
Peero
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 9
Joined: Thu Oct 19, 2017 1:43 am
City: Los Angeles
State: CA

Re: new box power steering

Postby Peero » Tue Jan 09, 2018 2:52 am

OK I wanna buy the stuff tru Summit unfortunately whether Summit or CPP is confirming me which Rag Joint I need.

Is it RJC730R
https://www.summitracing.com/int/parts/clp-rjc730r

Or just RJC730
https://www.summitracing.com/int/parts/clp-rjc730
Last edited by Peero on Wed Jan 10, 2018 5:02 am, edited 1 time in total.
Peero
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 9
Joined: Thu Oct 19, 2017 1:43 am
City: Los Angeles
State: CA

Re: new box power steering

Postby MadMC63 » Tue Jan 09, 2018 6:00 am

OMG!!! Those are the biggest pictures I've ever seen on this site! How?
Last edited by MadMC63 on Wed Jan 10, 2018 8:35 am, edited 1 time in total.
1971 Dodge D100
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?
User avatar
MadMC63
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 641
Joined: Sat Nov 14, 2015 12:16 pm
City: Rome
State: GA

Re: new box power steering

Postby Peero » Wed Jan 10, 2018 5:03 am

Oh damn....adjusted sorry...can you confirm which one to use?
Peero
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 9
Joined: Thu Oct 19, 2017 1:43 am
City: Los Angeles
State: CA

Re: new box power steering

Postby MadMC63 » Wed Jan 10, 2018 8:39 am

I'm sorry, no. I converted to power assist with all factory parts so I'm clueless.
1971 Dodge D100
So what's wrong with setting beneath a single pull string incandescent light bulb writing angry letters?
User avatar
MadMC63
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 641
Joined: Sat Nov 14, 2015 12:16 pm
City: Rome
State: GA

Re: new box power steering

Postby JLeather » Wed Jan 10, 2018 9:21 am

I *think* you need the 730R. It says it is a 3/4"-30 spline joint, and that's what the CPP 400-series box input is. I cannot find the bolt spacing for the column-side to confirm if it's correct for the Dodge column however. Based on CPP's catalog it says it's 3 3/16" diameter, but it doesn't say if that's the bolt circle or the OD of the rubber piece?
JLeather
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 111
Joined: Mon Dec 27, 2010 4:49 pm
City: Ijamsville
State: MD

Previous

Return to *SUSPENSION/BRAKE HELP*

Who is online

Users browsing this forum: No registered users and 2 guests