please help can not drive in a straight line !
please help can not drive in a straight line !
does anyone know where i could get a rebuild kit for the stearing gear on a '64 D200?
Re: please help can not drive in a straight line !
There's a place in Columbus, OH called Steer-n-Gear that would take yourmoparmike wrote:does anyone know where i could get a rebuild kit for the stearing gear on a '64 D200?
core and send you out a completely rebuilt one if you're interested. I think
they run about $275-$300? If Goldie sees this post, he'll fill you in as he's
done business with them.
John
- Butch Romig
- Sweptline.ORG Member
- Posts: 332
- Joined: Wed Dec 31, 1969 6:00 pm
- City: garnett ks
- Location: garnett kansas
Re: please help can not drive in a straight line !
i have a good used gear for sale $115 delivered
butch
butch
Re: please help can not drive in a straight line !
no one knows of a rebuild kit ?
i realy just need the bushings and seals there is no visiable wear on the iron parts its just loose and wont hold oil
i realy just need the bushings and seals there is no visiable wear on the iron parts its just loose and wont hold oil
-
- Sweptline.ORG Pioneer
- Posts: 1906
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Glendale,
- State: AZ
- Location: Glendale, AZ
Re: please help can not drive in a straight line !
Go for the rebuilt steering gear, especially if your going to keep it long term. $2-300. Jim
Call Benchworks Steering Systems @480-946-3992 or visit their site at http://www.benchworksteering.com
Call Benchworks Steering Systems @480-946-3992 or visit their site at http://www.benchworksteering.com
Last edited by JimE on Mon Jan 21, 2008 12:54 am, edited 1 time in total.
03 Hemi Ram 2500
Re: please help can not drive in a straight line !
wouldent $2-300 be most of the cost of converting to a p/s useing a ford gear?
- RussRoth
- Sweptline.ORG Pioneer
- Posts: 1345
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Vancouver, WA
- Location: Vancouver, WA
- Contact:
Re: please help can not drive in a straight line !
Walt McIntosh in MT can rebuild your old box for less, I think. I don't know where to get parts but apparently Walt does. I had him do mine since I could not find parts either. I haven't seen Walt post for a long time and I am not sure how to get ahold of him anymore.
RR
Vancouver, WA
'67 W200/450 CID
AA OD/SM465/205
PTO winch
4.10 powerlock
8R19.5 tires
Vancouver, WA
'67 W200/450 CID
AA OD/SM465/205
PTO winch
4.10 powerlock
8R19.5 tires
- devilbrad
- Sweptline.ORG Member
- Posts: 268
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Pacifica/California
- State: CA
- Location: Pacifica, CA
- Contact:
Re: please help can not drive in a straight line !
I emailed Steer N Gear back in September. This was the response.
We do not have a gear in stock to fit your truck. We should be able to rebuild yours. cost would be around $400.00. The turn around time would be around a week.
Thank you,
Jim Harless
1-800-253-4327