eaton detroit springs

dodged200 · Post by **dodged200** » Fri Apr 06, 2007 1:16 am

Just wanted to see if anyone had bought the 3" lowering springs from Eaton and if you have any pics of before and after? I dont think 3" is very much so I'd like to see before I make a decision. Thanks in advance.

dodged200 · Post by **dodged200** » Sat Apr 07, 2007 10:08 am

Ok, I'm wanting to lower my truck quite a bit. Just wondering if I bought the 3" eaton springs and lowered the front axle 3" do you think it would be too much? Would I have clearance problems(axle hitting frame or oil pan, things of that nature) I'm flipping the rear axle, putting discs all the way around and 20's front 22's rear. Trying to go the cheapest and easiest route so I can get it done quickly.

Jones · Post by **Jones** » Sat Apr 07, 2007 10:54 am

I don't think 3" would be too much. That's what I'm planning on doing. Any more and there might be a problem with oil pan clearance with axle travel. I was thinking if it turned out to be a bit tight I would add some rubber bump stops so it wouldn't hit the pan.

Keith

dylansd100 · Post by **dylansd100** » Sun Apr 08, 2007 6:53 pm

Ive searched and searched for these springs and cant find them. are you talking about having them custom made, if not please post a link or something

, thanks

Jones · Post by **Jones** » Sun Apr 08, 2007 8:10 pm

Here is the link...

http://www.eatonsprings.com/

Keith

tom-adc · Post by **tom-adc** » Fri May 04, 2007 6:50 pm

I checked the Eaton site and didn't see the springs being mentioned any one have a P/N or price for a pair?
I'm like to get maybe a 3" drop up front.

Jones · Post by **Jones** » Sun May 06, 2007 7:41 am

They have them. You just have to e-mail them to get the price.

Give them lots of details.

Keith

tom-adc · Post by **tom-adc** » Mon May 07, 2007 8:49 am

Thanks Jones I'll drop them a line.