Frame length

67LB318 · Post by **67LB318** » Thu Dec 28, 2006 12:56 am

Okay guys...got a questiong for you. How long is the frame on a SWB truck?

Thanks much....

Brandon

Post by **Hobcobble** » Thu Dec 28, 2006 11:39 am

Meaning.... TOTAL from end to end and not the
wheelbase measurement? Let me know and I'll
put a tape to a bare short wheelbase frame I
have

John

67LB318 · Post by **67LB318** » Fri Dec 29, 2006 9:38 pm

That's exactly what I mean John. Thanks :-)

Brandon

Post by **Hobcobble** » Mon Jan 01, 2007 8:54 am

I layed a tape to that frame and came out with
15 feet... give or take an inch or two.
John

MountainMoparRobin · Post by **MountainMoparRobin** » Mon Jan 01, 2007 8:56 am

thats on a SWB???

67LB318 · Post by **67LB318** » Tue Jan 02, 2007 9:52 pm

Umm...are you sure? 15ft seems a little long for a SWB....

MountainMoparRobin · Post by **MountainMoparRobin** » Wed Jan 03, 2007 5:46 am

I walked my LWB off at 15ft, to check to see if it would fit into a 1957 Garage????

Post by **Hobcobble** » Wed Jan 03, 2007 8:21 am

I'll check it again to be sure and let you know.
John

Post by **Hobcobble** » Thu Jan 04, 2007 11:21 am

Checked it again.... 15 feet almost on the nose.
Look at it this way.... 114" wheelbase measured
to axle center-lines.... add ~28" from the front
axle center-line to the end of the frame and add
~38" from the rear axle center-line to the end of
the frame

Robin.... ya better check your gait!

I hope you haven't closed on that house yet

....
you may have to blow out the back of the garage.
John

Roger · Post by **Roger** » Thu Jan 04, 2007 8:49 pm

Or just make another door with the truck!

MountainMoparRobin · Post by **MountainMoparRobin** » Sat Jan 06, 2007 6:27 am

IF THE TRUCK DON'T FIT, and I have room to walk around it, along with another vehicle, I WON'T BUY

lets don't forget the aircompressor the 6' Craftman tool box, need room for work bench, and hopefully very soon a WELDER

Sweptline.ORG

Frame length

Frame length

frame length

measure

length