Tie Rod End (Help)
Tie Rod End (Help)
Where do i find the 3/4 inch, right hand thread for passenger side. Have had three sent to me but all the wrong size thread. For a 1967 W200. Thanks for any and all help.
Re: Tie Rod End (Help)
I also when through that on my '69. I went to napa, and there was an older parts man that looked through his books, and found one that matched. I will check and see if I can get a number for you tmro.
Re: Tie Rod End (Help)
I figured if enough folks read my plea for help there would be some kind soul with a response. Thank you so very much! I mean that as everyone i call for parts and they hear what it is for seem to give me the cold shoulder. I could have bought a Ford - Chev - GMC - Etc. but i chose the Dodge and i am sticking with it hard to find parts or not.j2007 wrote:I also when through that on my '69. I went to napa, and there was an older parts man that looked through his books, and found one that matched. I will check and see if I can get a number for you tmro.
Thanks again j2007
- WD
- Sweptline.ORG Pioneer
- Posts: 1741
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rosemark
- State: TN
- Location: Lancaster Plantation
Re: Tie Rod End (Help)
Go talk to the guy who looks like Santa at Hagen's on River Road. They are re-opened, the fire only kept them shut for a year or so.
Puyallup National Auto Parts handles a lot of old Mopar stuff. Got my kingpin kit through them.
Tweaker Lake (Bonney Lake) Auto Parts. Talk to the kid, he's a Mopar fanatic.
Puyallup National Auto Parts handles a lot of old Mopar stuff. Got my kingpin kit through them.
Tweaker Lake (Bonney Lake) Auto Parts. Talk to the kid, he's a Mopar fanatic.
-
- Sweptline.ORG Pioneer
- Posts: 1906
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Glendale,
- State: AZ
- Location: Glendale, AZ
Re: Tie Rod End (Help)
Try Rare Parts: http://rareparts.bytedesigns.com/ez/sho ... oducts.asp
Jim
Jim
Re: Tie Rod End (Help)
acording to my parts book
right is mopar # 1843146
left.............. 1843147
There is a set on ebay,you could ask the seller to measure them,or search useing these #s
http://cgi.ebay.com/ebaymotors/NOS-MOPA ... 0349255863
right is mopar # 1843146
left.............. 1843147
There is a set on ebay,you could ask the seller to measure them,or search useing these #s
http://cgi.ebay.com/ebaymotors/NOS-MOPA ... 0349255863
Re: Tie Rod End (Help)
Thank you guys for your kind help... Means alot to me and this website has some pretty darn Good People! What i found according to the folks at Moog - Part #'s ES2847Rdigdoug wrote:acording to my parts book
right is mopar # 1843146
left.............. 1843147
There is a set on ebay,you could ask the seller to measure them,or search useing these #s
http://cgi.ebay.com/ebaymotors/NOS-MOPA ... 0349255863
ES2848L
That differs from the part # ES354R big time but it fits and works. Yahoooooo. Guess i can finally drive my truck and burn some fuel. Lots of fuel!!