Engine, transmission, rear-end, driveline, fuel system etc..
-
mopar
- Sweptline.ORG Member
- Posts: 79
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Manitoba
Post
by mopar »
Can a 318A's oil pump be primed with a electric drill the same way as a 318LA?
-
wideblock
- Founding Member
- Posts: 5617
- Joined: Wed Dec 31, 1969 6:00 pm
- City: las cruces nm
- State: NM
- Location: Las Cruces, New Mexico
-
Contact:
Post
by wideblock »
they use the same pump. the high volume part number for the LA is the bone stock poly pump
Trey
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
-
TimLG
- Sweptline.ORG Member
- Posts: 57
- Joined: Wed Dec 31, 1969 6:00 pm
Post
by TimLG »
Hope so. I made a driver out of an old 5/16 hex key and a peice of 3/8" steel tubing. Got 75 psi with electric drill on my Poly.
Tim G
-
mopar
- Sweptline.ORG Member
- Posts: 79
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Manitoba
Post
by mopar »
Thanks, I got it primed and running again.
