slip or s**t

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
User avatar
MountainMoparRobin
Founding Member
Founding Member
Posts: 7854
Joined: Wed Dec 31, 1969 6:00 pm
City: Lakewood
State: CO
Location: Lakewood Colorado

slip or s**t

Post by MountainMoparRobin »

I'm totally confused :thinking thought that I had a 3:23 rearend and now that I went with bigger cam and all, I'm not sure, thought I had a *#%^ rearend and only one wheel burn, then tonight, while testing the repair on the header, I did take offs and of coarse the tires burn, first tire burned for about 30 feet :idea then the second tire burned for another 15 feet, :bs blow my mind, maybe I should open all four barrells and see if bouth will burn at the same time? :banghead

User avatar
cowboy
Founding Member
Founding Member
Posts: 4233
Joined: Wed Dec 31, 1969 6:00 pm
Location: Alvin TX

Post by cowboy »

sounds like a limted slip , going out , with that much distance between them :thinking
:usa
cowboy Alvin Tx
67 w100 318 3spd
2005 Ram 2500 CC Diesel 4x4 lwb
LAND OF THE FREE
BECAUSE OF THE BRAVE

User avatar
wideblock
Founding Member
Founding Member
Posts: 5617
Joined: Wed Dec 31, 1969 6:00 pm
City: las cruces nm
State: NM
Location: Las Cruces, New Mexico
Contact:

Post by wideblock »

mine does the same thing robin. i get a dotted line burn out where it swapps side to side. :Thumbsup
Trey

1965 CSS Utiline.


ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100


"i don't know it all, but i know enough to be dangerous"

Post Reply