Motor mount position
-
- Sweptline.ORG Member
- Posts: 310
- Joined: Sun Mar 15, 2009 6:31 pm
- City: puyallup,wa
Motor mount position
Is there a certain way it’s supposed to set? The metal side folded up to face the front or to the firewall? And are both sides to fit in the same position?
Re: Motor mount position
What motor ? Slant six?
-
- Sweptline.ORG Member
- Posts: 310
- Joined: Sun Mar 15, 2009 6:31 pm
- City: puyallup,wa
Re: Motor mount position
Took out slant 6 and putting in 318 from a 85 Chrysler
Re: Motor mount position
i'm thinking firewall
to keep engine from moving forward under heavy braking or if you hit something
to keep engine from moving forward under heavy braking or if you hit something
-
- Sweptline.ORG Member
- Posts: 453
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Motor mount position
The metal lip goes toward the front.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear