Offenhauser dual port intake
-
- Sweptline.ORG Member
- Posts: 454
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Offenhauser dual port intake
Has anyone had experience with one of these on a 383?
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Re: Offenhauser dual port intake
can you post a pic
sounds like what i had on my amc 390
sounds like what i had on my amc 390
-
- Sweptline.ORG Member
- Posts: 454
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Offenhauser dual port intake
I haven’t been able to post pics yet.
The outlet ports are split top to bottom. It’s a 4 hole split plenum and the primaries have a separate path to the outlet than the secondaries.
I have heard they were made during the gas crunch.
The outlet ports are split top to bottom. It’s a 4 hole split plenum and the primaries have a separate path to the outlet than the secondaries.
I have heard they were made during the gas crunch.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
-
- Sweptline.ORG Member
- Posts: 454
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Offenhauser dual port intake
After some research it turns out that offy made these for mopars amc ford and others. Even some for inline 6’s
Any experiences others have had, I would like to hear about.
If they made that many,I’m sure someone here has had one.
Any experiences others have had, I would like to hear about.
If they made that many,I’m sure someone here has had one.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Re: Offenhauser dual port intake
yeah thats the one i had on my 69 amx 390
seamed to work ok had good low end power
think it would work best with a square bore carb ....been a long time but think i was running a carter
i could see it lacking in top end ,so would want to run a mild cam
and i think if you stay out of the 4bbl it would improve intake swirl and improve fuel economy (it was on the car when i bought it so can't say it was better
seamed to work ok had good low end power
think it would work best with a square bore carb ....been a long time but think i was running a carter
i could see it lacking in top end ,so would want to run a mild cam
and i think if you stay out of the 4bbl it would improve intake swirl and improve fuel economy (it was on the car when i bought it so can't say it was better