Timing cover dust seal

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
irontwist
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 79
Joined: Tue Jul 09, 2013 6:21 pm
City: Pendleton
State: OR

Timing cover dust seal

Post by irontwist »

Installing a Fel-pro Timing Cover Set Part # TCS45284. In the set is a felt timing cover dust seal, donut shaped. This dust seal was absent on disassembly and looking at the 318 Poly diagram and associated parts list it's not shown. If this is need, where dose it install? Thanks for info.
Top
irontwist
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 79
Joined: Tue Jul 09, 2013 6:21 pm
City: Pendleton
State: OR

Re: Timing cover dust seal

Post by irontwist »

I have determined that the felt seal goes behind the damper in its cup, as the outside and inside dimensions of the felt dust seal matches the dampers configuration. Have a good day.
Top
Kaegi
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1388
Joined: Tue Mar 18, 2008 12:49 am
City: Allyn WA

Re: Timing cover dust seal

Post by Kaegi »

yes thats right
Top
Post Reply

Return to “*ENGINE/DRIVELINE/FUEL SYSTEM HELP*”