Hey all,
Getting close to shoving the Magnum and NV4500 into the D100. I snagged original Auto rear Cross Member to use, but now for the little details.
Any idea on what Trans to Crossmember insulator mount would work? I'm seeing a lot that "Could" be a potential fit, but nobody lists the trans bolt separation etc.
NV4500 2wd Rear Mount
- marklein
- Sweptline.ORG Member
- Posts: 607
- Joined: Sun Nov 11, 2012 9:55 am
- City: Red Deer
- State: Foreign
Re: NV4500 2wd Rear Mount
I used a Chevy mount, but I have a Chevy 2wd output shaft.
-
- Sweptline.ORG Member
- Posts: 19
- Joined: Wed Jun 17, 2020 10:48 am
- City: Stevensville
- State: MT
Re: NV4500 2wd Rear Mount
yeah, just sort of found a few that may work. I think I can get some plate and make a quick adaptor for this to work on the trans side, then drill the cross member for the studs.
https://www.autozone.com/drivetrain/tra ... pps.s=3771
https://www.autozone.com/drivetrain/tra ... pps.s=3771