front drivline

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
User avatar
RAYMAN
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 277
Joined: Mon Nov 21, 2011 8:58 pm
City: Gifford
State: WA
Location: Gifford, WA

front drivline

Post by RAYMAN »

Does anyone have a part number for the front u-joint on the front shaft of a w-200 1968
Im old enough to know better, but young enough to do it anyway.

User avatar
PowerMan
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1186
Joined: Wed Dec 31, 1969 6:00 pm
City: Auburn
State: CA
Location: Auburn, CA

Re: front drivline

Post by PowerMan »

If it's the small u joint it is the 7260 series and the optional large detroit series is the 5380.
1962 W100 - NV4500- LU2 winch Looking for a 4BT!
1965 W200 CC 12 Valve P-Pump, HX35/S475, 5x12s, pushrods, 60# springs, 55 DVs, NV4500
1965 D100-> W100 Town Wagon 225 Slant - NP435

User avatar
RAYMAN
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 277
Joined: Mon Nov 21, 2011 8:58 pm
City: Gifford
State: WA
Location: Gifford, WA

Re: front drivline

Post by RAYMAN »

Thanks PowerMan Are those the only 2 options for the stock u-joint? Are those a mopar number or a napa number.
Im old enough to know better, but young enough to do it anyway.

User avatar
PowerMan
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1186
Joined: Wed Dec 31, 1969 6:00 pm
City: Auburn
State: CA
Location: Auburn, CA

Re: front drivline

Post by PowerMan »

They are the generic series of u joint not the part number. The large series driveshafts and u joints were an option so check that first.

5380 dimensions:
http://www.dennysdriveshaft.com/p10883_ ... 5380_.html

7260 dimensions:
http://www.dennysdriveshaft.com/p2647_n ... ease_.html
Last edited by PowerMan on Fri Jan 12, 2018 9:55 pm, edited 1 time in total.
1962 W100 - NV4500- LU2 winch Looking for a 4BT!
1965 W200 CC 12 Valve P-Pump, HX35/S475, 5x12s, pushrods, 60# springs, 55 DVs, NV4500
1965 D100-> W100 Town Wagon 225 Slant - NP435

User avatar
RAYMAN
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 277
Joined: Mon Nov 21, 2011 8:58 pm
City: Gifford
State: WA
Location: Gifford, WA

Re: front drivline

Post by RAYMAN »

Thanks again. I will have to check in the morning and see what I have for size. I don't think the u-joints have ever been changed. :lol:
Im old enough to know better, but young enough to do it anyway.

Post Reply