pinion bearing race

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
User avatar
oldodger
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 43
Joined: Wed Mar 03, 2010 1:22 pm
City: Anderson
State: CA

pinion bearing race

Post by oldodger » Fri Sep 01, 2017 8:22 pm

I have a 61 D100, and I want to replace the pinion bearing and the race. What is the best way to get the bearing race out?
Do I use a puller or do I have to take the differential out and punch it out?
Does it go out the front or the back?
Thanks for any help.

User avatar
marklein
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 339
Joined: Sun Nov 11, 2012 9:55 am
City: Red Deer
State: Foreign

Re: pinion bearing race

Post by marklein » Fri Sep 01, 2017 9:22 pm

Take the pumpkin out, replace all 4 bearings, 2 pinion bearings 2 center section bearings.. Has to be apart.

User avatar
oldodger
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 43
Joined: Wed Mar 03, 2010 1:22 pm
City: Anderson
State: CA

Re: pinion bearing race

Post by oldodger » Sat Sep 02, 2017 9:24 pm

OK, Thank you!

Post Reply