Sweptline.ORG

Hello from germany.
When i bought the truck the dip stick for the 727 was missing.
So i bought one from SUMMIT.Tube and stick.
It works but its to short.The measurement is always an act.
I wrote in "searching" category,but no answer.

Can somone send me a pic and a measurement? BB 383 WITH AC.

Rene

Hello again.
Nothing till these days.

Now i bought the LOKAR dip stick and tube.

Can someone tell me how far the dip stick looks into the tranny???
The Lokar stick iss adjustable in its length.

Thanks Rene

Noone an idea or an answer?

i have a 727 but with a 318.. don't think that should make a difference though
if you want, i can measure the lengths of my transmission dipstick from the shoulder to the level lines..

is that what you need ?

Hello.
Thank you for helping me.
I have the original tube with a dip stick which i didnt know where it is from.
This one looks only a little bit into the tranny.
I have got the one from Summit.It looks about 1" into the tranny.
Important are the level lines.

I think your measurement will help me to know how long the original dip stick iss.

RENE

sorry i forgot about your question..

i measured the dipstick and
from the bottom of the metal shoulder (under the rubber seal) it is:

16 3/8" to max fill line
16 3/4" to low (add one pint) line
18" to the tip